For any training requirements you have, PIPA recommends that you contact the following organisations directly

Polysmart Pty Ltd

PMBWELD301B - Butt weld Polyethylene Pipelines

PMBWELD302B - Electrofusion weld Polyethylene Pipelines

These Nationally Accredited Training Courses cover both the theoretical knowledge and practical application of the subject matter, these courses are written by our industry expert, with over 28 years of PE pipe welding experience and many Australian and European welding certificates also Certificate IV in workplace training he is still heavily involved with the day to day in-house and site welding of PE pipes.

The POLYSMART theoretical component is a self paced, computer based application that can be carried out anywhere there is internet access.

The POLYSMART practical component can be completed either fortnightly at our location in Melbourne or at your location under supervision of one of our industry trainers. (subject to costs)

POLYSMART issues a photo identification card and a hardened steel identification stamp upon successful completion of relevant welding courses.

POLYSMART also offers a low cost learning experience for Engineers, Consultants, Business owner / managers, Supervisors, Foreman or Sales staff. Contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it for more information.

For more information regarding training go to the www.polysmart.com.au website.

Polymer Fusion Technology

A Registered Training Organisation operating from Perth in Western Australia, Polymer Fusion Technology presents courses all over Australia and in South East Asia. They specialize in teaching fabrication and installation techniques in polyolefin products using wide range of equipment and techniques.<

Courses provided:

PMBWELD301B – Butt weld polyethylene plastic pipelines
PMBWELD302B – Electrofusion weld polyethylene pipelines
PMBWELD309B – Weld plastics using extrusion and injection techniques

For more information contact David Burge:
Telephone: + 61 8 9258 9444
Facsimile : + 61 8 9258 9555
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Web site: www.pft.com.au

North Coast Institute of TAFE, Wollongbar Campus

Peter Smith provides training and consultancy on butt fusion of polyethylene pipes, extrusion welding, electrofusion and hot air welding.

For more information contact Peter Smith, Welding Technologist
Wollongbar TAFE campus, PO Box 534,
Alstonville NSW 2477, Australia:
Telephone: 02 6620 4844 (Int: + 61 2 6620 4844)
Mobile: 0429 923 845 Fax: 02 6792 8809
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

XLT Industrial Training Pty Ltd

XLT Industrial Training is a registered training organisation specializing in welding and construction training. They offer Butt and Electro Fusion welding. (PMBWELD309B, PMBPROD287B) or combination thereof. Courses are based in their workshop (Perth WA), but will travel interstate or overseas to deliver site training. XLT can also deliver their PE and metal welding courses from their new offices at 340 Melton Rd, Northgate QLD - near Brisbane airport. They can mobilise at short notice to anywhere in Queensland from this new Brisbane location.

XLT also delivers a full range of support competencies, from chainsaw, EWP, Forklift, Dogging, Rigging, Crane, working at heights, confined space etc, as well as metal welding united, ranging from basic arc/stick to titanium and Underwater Welding. All courses are from the relevant national training packages. XLT instructors all have extensive experience in their relevant fields and can offer advice and services above and beyond the standard requirements.

XLT are setting up training centres in Sydney.

For further information please visit the
XLT web site: www.xlt.com.au or Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

MTTL

Materials Technology and Testing Laboratory (MTTL) is an Australian provider of plastics testing, site QA services, training, sales and hire of plastic welding and associated equipment to Australian and International markets.
MTTL is a NATA accredited testing service for polyethylene welding tensile testing, bend testing and peel testing. The laboratory is also equipped to handle moisture testing of resins, OIT testing of pipe, melt flow requirements and hydrostatic testing of pipe and fittings.
MTTL is also a nationally accredited provider of training services for Poly Butt, Extrusion and Electro fusion welding with the flexibility to come to you or alternatively training in one of our purpose built training facilities in Perth, Brisbane or Adelaide.
MTTL hire can provide Poly Butt, Electro fusion welders, generators and trailers with the ability to weld pipe from 20mm to 1200mm in diameter.

www.mttl.com.au
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Phone: +61 8 9306 2155

Engineering Training Australia

Engineering Training Australia (ETA) specialises in providing skilling solutions and career pathways in the Engineering and Mining Industries. ETA offers Nationally Recognised Training in Poly Welding including:

- PMBWELD301B Butt weld polyethylene plastic pipelines

- PMBWELD302B Electrofusion weld polyethylene pipelines

- PMBWELD309B Weld plastics using extrusion and injection techniques

All training is facilitated by industry experts, with both the theory and practical training conducted face-to-face in a simulated workplace environment using the latest Butt Weld and Electrofusion machines. Regular courses are scheduled at our training facilities on the Gold Coast, Ipswich, Newcastle, the Hunter region and Perth. ETA has a proven track record of also delivering training in the workplace both Nationally and Internationally. Refresher courses can also be scheduled to be facilitated in your workplace. All participants receive on completion a Statement of Attainment, a Poly Welding Ticket and a hardened steel ID stamp. We are the specialists in providing training and assessment solutions to all business, regardless of size and location.

For further information please visit ETA

Polyweld Tech Academy

Polyweld Tech Academy offers training in certified units of competency for HDPE Butt Welding- High & Low Pressure (PMBWELD301B), Electro Fusion Welding (PMBWELD302B), and Extrusion Welding including Hot Air, Wedge and Infra-Red (PMBWELD309B).

Courses are held all around Australia as well as on site for your convenience. Courses include theoretical knowledge and hands on practice using a range of welding machines combined with the latest technology and industry developments to ensure you gain the most experience from your course. At completion you will be confident in welding techniques with a certificate, stamp and welder card from an expert in the industry.

PWT Academy is also equipped with a NATA accredited laboratory specialising in tensile testing of butt welds and peel decohesions for Electrofusion welds along with a complete range of QA/QC tests. PWT also offers trained and experienced technical personnel to conduct all onsite QA inspections and testing to guarantee the quality of installations.

For further information-

Email:  This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Phone: 08 9452 3000

Top