|
Archived Items
|
Earlier PIPA Bulletins and AusPoly Press Releases can be read from the selection below.
- Philmac's balloon water stop for PE, August, 2008
- Chemson Goes Lead Free, August, 2008
- PIPELINES Newsletter, September 2007
- PIPELINES Newsletter, November 2005
- Award for Vinidex, September 2005
- PIPELINES Newsletter, June 2005
- PIPA at Shoal Bay, March 2005
- Protection of Polyethylene Pipe line assets
- PIPELINES Newsletter, April 2003
- PIPA Bulletin, 2002
- AusPoly Press Release, March 2001
- AusPoly Press Release, January 2001
- PIPA Bulletin, 2000
|
|
|
Philmac's balloon water stop for PE
Australian fittings manufacturer Philmac have recently demonstrated the Friatec balloon technique for dealing with unwanted water flows in a PE pipeline. Go to the press release for details.
PIPA Press Release, August, 2008
|
|
|
Top
|
|
|
Chemson Goes Lead Free
Australian PVC industry continues to set sustainability benchmarks. In their drive to achieve even better sustainability outcomes for PVC products, Chemson Pacific will no longer manufacture lead based stabilisers in Australia. Their shift away from the use of heavy metal stabilisers is in tune with the position of PIPA members and is in keeping with our industry's successful drive to exclude heavy metal stabilisers from Australian PVC pipe products. Go to the press release for details.
PIPA Press Release, August, 2008
|
|
|
Top
|
|
|
PIPELINES Newsletter
as PDF (64 kb)
PIPA has released the fifth issue of PIPELINES, the official Newsletter of PIPA. Members have received a copy in the mail, but it is available here in PDF format.
PIPELINES Newsletter, November 2005
|
|
|
Top
|
|
|
PIPELINES Newsletter
as PDF (136 kb)
PIPA has released the fourth issue of PIPELINES, the official Newsletter of PIPA. Members have received a copy in the mail, but it is available here in PDF format.
PIPELINES Newsletter, November 2005
|
|
| Top |
|
|
Cleaner Production Manufacturer, Vinidex
PIPA congratulates Vinidex Pty Ltd, the Smithfield site in NSW, on receiving the Water Environment Merit Award, sponsored by Australian Water Association (AWA), at the 2005 Western Sydney Environment Month, organised by the NSW Government's Office of the Minister for Western Sydney and supported by its project partners. Go to the press release for details.
PIPA Press Release, September 2005
|
|
|
Top
|
|
|
PIPELINES Newsletter
as PDF (119 kb)
PIPA has released the third issue of PIPELINES, the official Newsletter of PIPA. Members have received a copy in the mail, but it is available here in PDF format.
PIPELINES Newsletter, June 2005
|
|
|
Top
|
|
|
PIPA at Shoal Bay
PIPA meets at Shoal Bay
The first PIPA PVC Technical Committee and PIPA Polyolefins Technical Committee meetings for 2005 were held at Shoal Bay, NSW. The meetings were held in conjunction with a mini technical seminar.
PIPA at Shoal Bay, March 2005
|
|
|
Top
|
|
|
Protection of Polyethylene Pipe line assets
PIPA has issued a press release about the protection of polyethylene pipeline assets. As with all systems, the long-term performance of the pipeline relies on the installation procedures and quality control systems adopted by the installers and the asset owners. Go to the press release for details.
PIPA Press Release, January 2005
|
|
|
Top
|
|
|
PIPELINES Newsletter
as PDF (125 kb)
PIPA has released the second issue of PIPELINES, the official Newsletter of PIPA. Members have received a copy in the mail, but it is available here in PDF format.
PIPELINES Newsletter, April 2003
|
|
|
Top
|
|
|
PVC Pipes resist root growth
Results of extensive CSIRO tests
PVC pipes comprehensively withstand the damaging plant root intrusion. In extensive tests carried out by the CSIRO, PVC pipes easily out performed Vitrified Clay (VC) and Fibre Reinforced Concrete (FRC) pipes in resisting plant root intrusion.
PIPA Bulletin, 2002
|
|
|
Top
|
|
Polyethylene Pipe for Compressed Air Applications
In trade publications there appears to be considerable confusion about the use and installation of polyethylene pipe in compressed air applications according to Mike Stahmer, Chairman of the AusPoly Technical Committee.
In compressed air applications polyethylene PE 100 and PE 80B are recommended and used extensively, whereas PE 63 and PE 80C are not normally recommended. Standards Australia has published the revised version of AS/NZS 4130, Polyethylene (PE) pipes for pressure applications.
AusPoly Press Release, March 2001
|
|
|
Top
|
|
Field Butt Welding of Rural or Thin Wall Poly pipe
Simple butt welders are now being offered to the farming market to weld rural or thin wall metric poly pipe and offer the promise of reducing the expenses associated with purchasing mechanical joiners/couplers.
These butt welders run the risk of producing welds which may fail prematurely. Polyethylene pipe appears to be a very forgiving material initially, however, any polyethylene system is only as good as the joints. If the joints are not made with the correct equipment and procedures the joints have a much higher chance of premature failure.
AusPoly Press Release, January 2001
|
|
|
Top
|
|
|
Long Life of PVC pressure pipes
30 years of service
The long life of PVC pressure pipes is confirmed when PVC pressure pipes laid in the 70’s were exhumed after almost 30 years of service to determine their conditions.
PIPA Bulletin, 2000
|
|
|
Top
|
Archived Items